Kingdom Hearts Re:Chain of Memories US/JAP

But thats not possible sense the controls are totally different and well whats the point of that it will be like kh2 they will be dummys and they wont do anything and i see no possible way to do this.

 

This is one of the times that i wish re:Com had shortcuts like kh2 x,o,square,triangle but im not putting the effort in doing this.

 

Yeah, I just wanna switch the button, X to O, O to X. Getting the value for each button then switching it over would work, right? Thing is, I have no idea how to do that. Wouldn't it be a very simple code for coders/hackers?

 

hmmmm well actually no since it doesnt work that way they arent jokers that will change he copntrols of the setting and even if it does i think it will be DMA idk but most probably this code cant be hacked........

 

Ohh.. that's too bad. I could use my PSP as a controller and remap the button config but the PSP has no R2 and L2 buttons[unless these are not used?]! Guess I'll have to get used to the controls then.

 

yup ^^" or you can egt the japanese version since the controls r swapped in that XD :P

 

Hahahhah, I already completed the Japanese version but I don't understand any Japanese at all so yeah... =(

 

they are more hare just thanks

click hare if u want more codes thanks

 

LOL, they're all in arabic..

The majority of this forum can only speak english...

 

Er those are all just cards why not use all cards shorten version on the front page.

 

anyone have the gameshark codes for all attack, all map and infinite health?

 

code are on the first page ^^

 

raw

What is the max cp code in raw?

And is there and (M) code in raw?
Can you get those codes please

 

Nice thread going on here (first post), I'm new to the whole jokering thing and figuring out which ones are gameshark and ar and other stuff. Does anyone have all the codes listed throughout this thread but in gameshark2 v 1.3 format? I'm trying to convert them but it isn't going so well :(

 

Max CP
2060D2A4 00009999

Master code
F0100238 002F117B

 

the Raw format e.g:

XXXXXXXX XXXXXXXX

are use for both Codebreaker and gameshark ^^

 

Hey guys I haven't checked this in a while. Are there any codes for gameshark v. 1.3? I have absolutely no idea how to creat codes or anything like that. Help would be much appreciated.

 

Haven't been here in forever! Anybody figure out the boss codes, or have they just been dropped? (They're not on the first page, so...)

 

Desperate!

I'd like to ask a VERY MUCH NEEDED question:

How can I enter Mastercodes onto Gameshark V. 1.3

I'm stuck at Zexion and really need and infinite health code right about now.

Thanks.

 

The following will walk you through the steps of manually entering codes to the GameShark 2 version 1.x, 2.x, 3, 4, and 5.x.

1. At the main menu of the GameShark go to “Select Game”, “Select Cheats”, or “Expert Cheat Mode” and press [X] on your controller.

2. Press the [O] button on your controller. You will either get a virtual keyboard or a small window that says “Add/Cancel”. Move to “Add” and press [X] on your controller, if you get the window that says “Add/Cancel”. Type the name of your game using the virtual keyboard. Once you are done entering the name of the game, move to "OK" or the enter key, which looks like an arrow pointing to the left with a bend on the end of the arrow, and press [X] on your controller.

3. You will see the name of the game you entered on the list with the other games on the GameShark. Press right on your controller’s directional pad, while your cursor is on the name of the game. This will open a new window that has the name of the game at the top of the screen. Press your [O] button and select “Add” if it asks to “Add/Cancel”. You will then need to type in the name of your cheat. The first cheat name you will want to enter is the “[M] Must Be On” or “Master Code”. You can enter the letter "M" (without the quotations) as the name and move to "OK" or the enter key and press [X] on your controller.

4. You will now see the letter "M" you just typed in. Press right on the directional pad of your controller. You will open a new screen that has the letter "M" at the top of the page. Press your [O] button and select “Add”, if it asks you to “Add/Cancel”. Enter in the cheat code you found on our website and move to "OK" or the enter key and press [X] on your controller. If the cheat has more than one line of code, press your [O] button again and select “Add”, if it asks you to “Add/Cancel”. Type in the next code and move to "OK" or the enter key and press [X] on your controller. Repeat this process until all of the codes are entered for the “[M] Must Be On” or “Mastercode”.

5. When you are done entering the codes for the “[M] Must Be On” or “Mastercode”, press left on your controller’s directional pad to go back to the cheat description screen. To add the next cheat, repeat steps 3-4. It is the same process as the “[M] Must Be On’ or “Mastercode”. The only difference is you will want to name the cheats differently.

6. Once you are done entering all of the codes you want, you can now activate them by going to the screen that has the cheat descriptions and pressing your [X] button on the cheats you want activated. The cheats will begin to flash indicating they are active. The “[M] Must Be On” or “Mastercode” will automatically activate itself as soon as you activate any of the other cheats.

7. When ready to start the game, press start on your controller. You will either be brought to the main menu or see an option to start game with cheats. If you are brought to the main menu, move to start game and press [X] on your controller. If you see the option to start the game with the cheats on, select “Yes”. The GameShark will eject (If you have the full size PS2) and ask you to take the GameShark out and put in your game. Press [X] on your controller, after you insert your game in the PS2 and the game will load.

8. If you have the new Slim PS2, you will need to press the eject button for the tray to open. The Slim PS2 gives you about 6 seconds to eject the tray before it tries to load. If you wait too long, it thinks you have inserted the game and will try and load. Once the lid is open on the PS2, it will not try and load until the lid is closed. If the PS2 tries to load before you can press the eject button, you will need to reset the PS2, load the GameShark back up and activate the cheats again.

9. The cheats you activated should be active when the game starts. Some cheats have special procedures that you will need to follow when the game starts, in order for the cheat to work. The cheats that require a special procedure will have that procedure written next to the cheat on our cheat list.

10. If you are using the GameShark Gamecodes with or without the Media Player and are adding the cheats manually, you will need to reset the Playstation 2 after the new cheats have been saved. Once the GameShark loads back up, you can then activate the cheats you added and start the game. If you try and activate the codes after saving them, they will not work. You need to reset the PS2 first before they will work.

Attention GameShark 2 v1.2 and v1.3 Users
There is an issue when adding a cheat that has multiple lines of codes. When you start to add the second line of code, the cursor starts you at the end of the code. If you delete the code that is there, you will not be able to enter the complete new code. You will only be able to add 14 characters of the code, when in fact there are 16 characters that need to be entered.
To solve this problem, you wi
Source(s):
http://www.gameshark.com/linkto.asp?url=http://www.madcatz.com/faq/